The FCM is a duct flange cutting machine that cuts flange profiles to the length you need with a diamond-tipped saw, leaving no burrs. Pneumatic, with a foot pedal. The operator keeps both hands on the profile. A stainless protective cover helps prevent accidents at the saw. It cuts flange lengths from 100 to 1500 mm and suits duct shops that build flanged duct from separate flange profiles (catalogue: Flange Cutting Machine, FCM).
General Features
- Burr-free cutting with a diamond-tipped saw
- Pneumatic operation with a foot switch for convenient cutting
- Stainless protective cover helps prevent occupational accidents
- Stable mechanical design
- Flange length 100–1500 mm
- Air requirement 6 bar, 8 L/min
Technical Specifications
| Model | Capacity (mm) | Electricity (V/Ph/Hz) | Power (kW) | Width (mm) | Height (mm) | Length (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| FCM | 1.2 | 380 V / 3Ph / 50 Hz | 1.5 | 560 | 720 | 1000 | 120 |
Further specifications: air requirement 6 bar, 8 L/min · flange length 100–1500 mm.
Sheet thickness capacities are given for ST37 (S235JR) mild steel, yield strength 235 N/mm² (24 kg/mm²). EBR METAL reserves the right to change models and technical specifications without prior notice.
Where the Flange Cutting Machine Fits in Your Duct Line
It belongs to the separate-flange route: flange profiles are cut to length on the FCM and then joined to the duct, for example with a spot welder (see spot welding equipment). If you form the flange directly on the duct sheet instead, see the TDF Flange Forming Machine. The full sequence is on the HVAC Duct Production Line page.
Frequently Asked Questions
What does the FCM flange cutting machine cut?
It cuts duct flange profiles to any required length between 100 and 1500 mm, using a diamond-tipped saw that leaves no burrs.
Does it need compressed air?
Yes. The machine is pneumatic and needs 6 bar at 8 L/min.
How is the cut started?
With a foot pedal (foot switch), which leaves the operator’s hands free to hold the profile.
What power supply does it need?
380 V, 3-phase, 50 Hz. Motor power is 1.5 kW.